Download

Documentation

Print This page

How to Enable and Disable the Analytics at Front-End?

Are you wondering how to manage the visibility of your website analytics? Whether you want to display analytics data on the front end of your WordPress site or keep it hidden, understanding how to toggle this feature in Analytify is essential. Here’s a straightforward guide to help you control the front-end analytics display with ease.

Enabling and Disabling Front-End Analytics in Analytify

To adjust the visibility of analytics on your website’s front end, follow these steps:

  1. Access Your Dashboard: Log into your WordPress dashboard.
  2. Navigate to Settings: Go to Analytify>>Settings.
Analytify-Settings
  1. Navigate to Front Tab: In the settings window, navigate to Front.
  2. Find the Option: Look for the Disable front-end option in the Front tab.
  3. Toggle the Setting: Change the Disable front-end setting from No to Yes to hide analytics data from the front-end.
  4. Customize Front-end panels: You can also customize the Front-end panels as per your requirement. Read our guide on How to Customize the Analytics Panel for Front-End.
disable front end analytics

Alright! You’ve successfully disabled front-end analytics.

Now, if you want to enable analytics on your WordPress website’s front-end, you need to change the Disable front-end setting from Yes to No.

  1. Save Changes: Don’t forget to click on the Save Changes button.

Improve Front-End Analytics Using Analytify Shortcodes

You can use Analytify shortcodes to give the front end of your website the same look and feel as the Analytify dashboard. But you have to be creative in design and code.

Below is an example of a section that was made by employing shortcodes:

general-statistics

Sample Codes

Here are the codes available at github that were used to make the above sections. You can use these codes as a starting point and add them as needed.

If you have any further questions about Front-end analytics, visit the FAQs on the Analytify website or contact our support team.